Tree Cable Designed For Loxone System - Now to CPR Class B2ca

FS Cables stock the all-in-one Tree cable & jumper wires, designed for use for Loxone Tree devices - whether that’s motion sensors, switches or LED spots. Available on 100m, 200m and 500m reels all for next day delivery, this cable is CPR certified up to class B2ca and an LSHF version is also available.

The standardised colour-coding of the pairs greatly reduces the margin for error on an install. The Tree cable can be used universally and is optimally suited for the communication of all Tree products as well as for the power supply of the respective components.

Peripheral products such as motion detectors, Touch Pure switches and actuators are connected to the Tree branch via the twisted green / white wire pair. The power supply for peripheral products is very low. That’s why the equally twisted orange / white pair of wires is ideal for the power supply.

Tree products that serve as consumers typically require a power supply that can deliver more power. This is the case, for example, with Tree lighting products such as LED spots and LED RGBW dimmers. Especially for these products, the Loxone Tree Cable is equipped with two 1.5mm² orange / white wires in addition to the two twisted pairs. Thus, there is always enough power to reliably supply Loxone Tree spots and dimmers.

For more information and technical data, click here